Characterization of medieval proteinaceous painting media using gas chromatography and gas chromatography — mass spectrometry

Proteinaceous organic materials used as ancient painting media were investigated by capillary gas chromatography (GC) and capillary gas chromatography — mass spectrometry (GC/MS). Medieval wall paintings made by the tempera technique were considered and their binding media were studied by the characterization of their main chemical components. The basic methodology is based on the determination of amino acids in samples of paint layers after hydrolysis and derivatization and on the comparison with reference proteinaceous materials. Multivariate chemometric techniques were used to facilitate the recognition of the protein source from chromatographic data. To characterize the binders further, a method was developed for the determination of fatty acids, present as minor components, by GC/MS. The use of fused-silica capillary columns coated with selected stationary phases allowed the separation of amino acid and fatty acid derivatives in a single analytical run.     

SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5'-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5'-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δ v ), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization ( k ₁) from Z to N in the excited state. Some of these parameters (f_N, Δ v , Q_N, k ₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

Transition radiation in cholesteric liquid crystal

We consider a constant velocity charged particle travelling in an arbitrary direction by a cholesteric liquid crystal. We calculate the time-dependent-induced polarisation in the cholesteric by the electric field generated by the charged particle. Thus, we express the radiation field originated by the induced dipole distribution in the cholesteric in terms of the cholesteric susceptibility. To simplify our procedure, we write Maxwell equations and the constitutive non-local equation for the cholesteric, in the Fourier space since in this representation the equations turn to be simple difference equations. We solve these equations iteratively by assuming small values for the cholesteric birefringence to find the first-order electric field produced by the charge particle immersed in the cholesteric. This allows us to obtain the dominant contributions of the radiation field one of which is the usual Cherenkov effect. We focus in the terms occurring for hypoluminic charged particle and calculate the radiated energy as a function of observing angle, frequency, velocity and direction with respect to the cholesteric axis.     

Study on the Influence of Chirality in the Threading of Calix[6]arene Hosts with Dialkylammonium Axles

The influence of chirality in calixarene threading has been studied by exploiting the “superweak anion approach”. In particular, the formation of chiral pseudo[2]rotaxanes bearing a classical stereogenic center in their axle and/or wheel components has been considered. Two kind of pseudo[2]rotaxane stereoadducts, the “endo-chiral” and “exo-chiral” ones, having the stereogenic center of a cationic axle inside or outside, respectively, the calix-cavity of a chiral calixarene were preferentially formed with specifically designed chiral axles by a fine exploitation of the so-called “endo-alkyl rule” and a newly defined “endo-α-methyl-benzyl rule” (threading of a hexaalkoxycalix[6]arene with a directional (α-methyl-benzyl)benzylammonium axle occurs with an endo-α-methyl-benzyl preference). The obtained pseudorotaxanes were studied in solution by 1D and 2D NMR, and in the gas-phase by means of the enantiomer-labeled (EL) mass spectrometry method, by combining enantiopure hosts with pseudoracemates of one deuterated and one unlabeled chiral axle enantiomer. In both instances, there was not a clear enantiodiscrimination in the threading process with the studied host/guest systems. Possible rationales are given to explain the scarce reciprocal influence between the guest and host chiral centers.     

LDA approximation based analysis of the adsorption of O<Subscript>3</Subscript> by boron nitride sheet

Based on the density functional theory whitin the local density aproximation, we investigated the adsorption of the ozone molecule by the boron nitride sheet. To model the sheet we used a planar C _n H _m cluster; four high symmetry sites in the mesh were considered. A total energy calculation indicates that the boron nitride sheet remains planar and the ozone is adsorbed with an energy of 0.41 eV; the ozone reacts with the sheet forming an epoxy group and an oxygen molecule in an unstable configuration.     

Triazine‐Based Graphitic Carbon Nitride: a Two‐Dimensional Semiconductor

Graphitic carbon nitride has been predicted to be structurally analogous to carbon‐only graphite, yet with an inherent bandgap. We have grown, for the first time, macroscopically large crystalline thin films of triazine‐based, graphitic carbon nitride (TGCN) using an ionothermal, interfacial reaction starting with the abundant monomer dicyandiamide. The films consist of stacked, two‐dimensional (2D) crystals between a few and several hundreds of atomic layers in thickness. Scanning force and transmission electron microscopy show long‐range, in‐plane order, while optical spectroscopy, X‐ray photoelectron spectroscopy, and density functional theory calculations corroborate a direct bandgap between 1.6 and 2.0 eV. Thus TGCN is of interest for electronic devices, such as field‐effect transistors and light‐emitting diodes.     

Trixis angustifolia hexanic extract displays synergistic antibacterial activity against M. tuberculosis

A phytochemical and antibacterial study of Trixis angustifolia, a species endemic to Mexico, was performed allowing the isolation of six flavones. The minimal inhibitory concentration (MIC) of the hexanic extract, against Mycobacterium tuberculosis H37Rv was 25 μg/mL. The hexanic extract caused a significant inhibition of intracellular mycobacterial growth at 12.5 μg/mL. The biodirected assay of hexane extract enabled the detection of an active fraction (AF) against M. tuberculosis (MIC = 12.5 μg/mL), and a major flavone 1 (pebrellin) with no antimycobacterial activity (MIC > 200 μg/mL). A subsequent combination antimicrobial assay showed a synergistic antimycobacterial effect of AF in combination with pebrellin; the results of the synergistic activity suggest that the antimycobacterial activity found in T. angustifolia is due to the combined action of diverse metabolites present in the plant.     

In‐Situ Nanostructuring and Stabilization of Polycrystalline Copper by an Organic Salt Additive Promotes Electrocatalytic CO2 Reduction to Ethylene

Bridging homogeneous molecular systems with heterogeneous catalysts is a promising approach for the development of new electrodes, combining the advantages of both approaches. In the context of CO₂ electroreduction, molecular enhancement of planar copper electrodes has enabled promising advancement towards high Faradaic efficiencies for multicarbon products. Besides, nanostructured copper electrodes have also demonstrated enhanced performance at comparatively low overpotentials. Herein, we report a novel and convenient method for nanostructuring copper electrodes using N,N′‐ethylene‐phenanthrolinium dibromide as molecular additive. Selectivities up to 70 % for C_≥2 products are observed for more than 40 h without significant change in the surface morphology. Mechanistic studies reveal several roles for the organic additive, including: the formation of cube‐like nanostructures by corrosion of the copper surface, the stabilization of these nanostructures during electrocatalysis by formation of a protective organic layer, and the promotion of C_≥2 products.     

Scale Inhibitor and Dispersant Based on Poly(Acrylic Acid) Obtained by Redox‐Initiated Polymerization

Low molar mass poly(acrylic acid) (PAA) is generally obtained by free radical polymerization of acrylic acid (AA) in aqueous solution, using thermal initiators and some chain transfer agent. However, under such conditions it is rather difficult to efficiently produce molar masses as low as those required for obtaining an effective dispersant. In this work, the semibatch polymerization of AA at 45 °C is considered, using potassium persulfate (KPS) and sodium metabisulfite (KPS/NaMBS), or alternatively KPS and sodium hypophosphite (KPS/NaHP) as redox initiators to produce PAA of controlled low molar masses. These initiation systems allow the production of PAA with M_n as low as 2.0 kDa, relatively narrow molar mass distribution (1.5 < M_w/M_n < 3.0), and low branching degree. Most of the investigated polymerizations reach almost complete conversions (>95%); and it is verified that both reductants, NaMBS and NaHP, also behave as chain transfer agents. Finally, the investigated process with redox couples allowed the production of PAA with acceptable dispersant and antiscaling properties.     

How water makes graphene metallic

A simple explanation is given on the tendency of graphene to become metallic when the amount of doped water is increased, an effect which was previously obtained from ab initio band calculations. It is clarified how the effect is mainly determined by oriented water electric dipoles, which create a step like potential at the separation distance between graphene and water planes. By using perturbation theory and an effective potential coupled with a image-charge tail potential, we showed that under increasing the water doping, the lowest energy free band in graphene starts lowering their energies by approaching to the Fermi level. Moreover, we demonstrated that this crossing induces a huge increase of states at the Fermi level, an effect akin to the magic-angle flat-band appearance in bilayer graphene.